manualshive.com logo in svg

IDEAL Viscount GTS 14, Установка и обслуживание

Поделиться
Скачать
IDEAL Viscount GTS 14 Скачать руководство пользователя страница 25

25

Viscount GTS - 

Installation & Servicing

INSTALLATION

1

VIS5087

•

Fit the door onto the hinge
by inserting the pin (1).

2

VIS5088

29 INSTALLING THE HINGE OF THE FURNACE DOOR - Cont'd

•

Close the furnace door on the 8 studs and
fasten with 8 washers and nuts (2).

30 FITTING THE FLUEWAY DOORS

VIS5089

•

Fit the two doors of the upper flue ways (wing nuts).

•

Fit the plain flange onto the upper connection of the front
section (using four M18 nuts), with the 170 x 222 gasket in
between (first soak the gasket in warm water).

•

Fit the flange with the sludge removal hole onto the lower
connection of the front section (hole in the lower part of the
flange) using four M18 nuts, with the gasket in between
(soak in warm water first).

31 FLAME INSPECTION WINDOW

VIS5090

The flame inspection window is fitted with a 1/4" tapped hole for
ventilation (optional) :

-

if a ventilation system is used, connect the hole to the one
provided for that purpose before the burner combustion head.

INST

ALLA

TION

Содержание Viscount GTS 14





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды