26
3
3
Blade change
• Simultaneously press both actuators and
keep pressed until end of the cut.
The blade travels at a reduced speed
downwards and remains in the lowest
position.
• Gently unscrew 3 blade screws
3
so that
the blade slowly slips downwards onto the
cutting stick.
The Blade must rest on the cutting stick.
• Using the hexagonal socket spanner,
pressure-tighten the centre blade screw
3
downwards (40 Nm).
• Also tighten the remaining four blade screws
beginning on the left (40 Nm).
• Simultaneously press both actuators, blade
travels upwards at a reduced speed.
Warning!
The blade must always be
covered in the top position by
the clamp bar!
Содержание THE 56
Страница 1: ...THE 56 EN Operating Instructions...
