IDEAL 8354 Скачать руководство пользователя страница 42

Страница: 42 / 48

Possible malfunctions

Fault

Possible cause

Solution

Reference

Skewed fold.

Fine-tuning was not

carried out.

Adjust the feeder

using the adjustment

knob.

5. - 7. Settings

The speed was

changed during the

folding process.

Do not adjust the

speed during the

folding process.

The folding rollers are

dirty.

Clean the folding

rollers.

19. Maintenance and

cleaning

The loaded paper

is not correctly

positioned alongside

the paper guides.

Position the paper

neatly alongside the

paper guides on the

right and left.

The paper feed

table is not correctly

adjusted.

Adjust the paper

feed table using the

adjustment knob.

5. Skew adjustments

The paper is cut at an

angle.

Correct this using the

adjustment knob.

Paper is thin or curled

up.

Replace or turn the

paper (if possible).

Paper jam occurs

frequently.

The folding rollers are

dirty.

Clean the folding

rollers.

19. Maintenance and

cleaning

The folding rollers are

not inserted correctly.

Fit the folding rollers

correctly.

The paper used

is outside the

specifications.

Use suitable paper.

Thicker paper is

folded more slowly.

Increase the speed

accordingly.

16. Speed

The fold plates are

not inserted correctly.

Check the fold plates

and insert them

correctly.

Paper tears in certain

places.

Check where the

damage is and

remove the jammed

paper.

The paper feed

rollers are dirty.

Clean or replace the

paper feed rollers.

(Order no. 8330 001)

19. Maintenance and

cleaning

The paper is statically

charged.

Use anti-static spray.

Содержание 8354

















































Результаты поиска

Содержание 8354

Отзывы:

Бренды по названию

Популярные бренды

IDEAL 8354, Руководство по эксплуатации

Результаты поиска

Содержание 8354

Отзывы:

Бренды по названию

Популярные бренды