IDEAL 61-481, Руководство пользователя

Страница: 3 / 10

6 5
Overload Protection
Function Overload Protection
VAC & VDC 1000V
AAC & ADC 1A/500V
16A/500V
Ohms (
Ω
) 600VAC/600VDC
Diode 600VAC/600VDC
Continuity 600VAC/600VDC
Unit of Measure Multipliers
For your reference, the following symbols are often used to
make measurement easier:
Symbol
Verbal Multiplier
M mega x 1,000,000
k kilo x 1,000
m milli ÷ 1,000
µ micro ÷ 1,000,000
Auto Power Off (APO)
The APO sign on the LCD panel indicates the meter is working
in the Auto Power Off mode. If the meter idles for more than 30
minutes, the meter automatically turns the power off. When this
happens, the state (non-logic measurement) of the meter is
saved, the meter can be turned back on by pushing any key
switch or changing the rotary switch. The meter will give an
alarm 15 seconds before the meter automatically turns the
power off. To disable the auto power off function, power up the
meter while pressing either the range or Hz switch.
True RMS AC Volt
Range Resolution Max Display Accuracy
400mV 0.1mV 400.0 ±(2.0% +10)
40Hz to 60Hz
4V 1mV 4.000 ±(1.3% +5)
40Hz to 500kHz
40V 10mV 40.00 ±(1.3% +5)
400V 100mV 400.0 40Hz to 1kHz
750V 1V 750
AC Conversion Type: AC conversions are ac-coupled, true rms
responding, calibrated to the rms value Sine wave input.
Input and Impedance: 10M
Ω
less than 100 PF.
Crest Factor: +1.5% additional error for C.F. from 1.4 to 3
+3.0% additional error for C.F. from 3 to 4
To Measure True RMS AC Voltage:
1. Plug the black test lead into the COM port and the red test lead
into the V
Ω
H port.
2. Set the rotary switch to the V position.
3. Push the blue button until
AC
is shown on the display.
4. Connect the meter in parallel with the load or circuit.
5. Measure AC Voltage.
Circuit Connection:
Hz
True RMS