manualshive.com logo in svg

IDEAL 4810-95, Руководство по эксплуатации

Поделиться
Скачать
IDEAL 4810-95 Скачать руководство пользователя страница 24

• 

Operation 

• 

IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP 

IDEAL 4850-95EP, 

IDEAL 5221-95EP, IDEAL 6550-95EP 

Start machine 

• 

Main switch 

F

 to position "I", insert the key 

H

 for the control panel and turn it to the right. 

Open the front safety guard 

A

• 

Press 

S

 button 

O 

­

backgauge 

I 

moves 

to the rear and searches for the reference 

position, wait until a measurement 

is shown in the display 

D. 

IDEAL 4850-95/EP = 45 cm, 17,72 inches 

IDEAL 5221-95EP  = 52 cm, 20,47 inches 

IDEAL 6550-95/EP = 61 cm, 24,02 inches

 Warning! 

Before storing or cutting a measurement 

please check if the correct measurement 

scale (cm or inch) see above is stored. 

For information on how to store see picture 

below left. 

Cutting to specified dimensions

• 

Enter dimension on the numerical key pad 

Q 

­

LED "S" 

X

 appears.

 

(If a wrong dimension is entered this can be

 

corrected by pressing the 

s

 button).

• 

Press 

S

 button 

­

dimension is 

approached, 

­

LED "S" disappears. 

Dimensions below 9 cm 

­

3,5 cm (IDEAL 

6550-95EP 2,5 cm) can only be  approached 

with the 

S 

button pressed and held. (When 

the 

S

 button 

O

 is released, the backgauge 

I

 moves to a measurement  of 9 cm 

­

measurement 9 cm blinks, keep 

the 

S

 button pressed, backgauge 

I

 moves 

to  e.g. 7 cm.

• 

Insert paper and move by means of the 

stacking angle to the backgauge 

I

 and side 

lay on the left 

J

. 

• 

Close the front safety guard 

A. 

• 

Release the cut. 

Cut according to markings

• 

Adjust the backgauge with the hand-wheel 

G 

to the back. 

• 

Insert paper and move by means of the 

stacking angle to the backgauge 

I 

and side 

lay on the left 

J. 

• 

Turn the hand-wheel 

G

 to the right until the 

marking on the paper to be cut is below the 

cutting line indicator. 

Only EP machines.

•

 The further the hand-wheel 

G

 is turned to the right, the quicker the 

backgauge moves. If the hand-wheel  is 

turned to the left the backgauge will return 

quicker. 

- 24 ­

http://www.monomachines.com

http://www.monomachines.com

Содержание 4810-95





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды