background image

 

Product Care

All our products are designed, manufactured and supplied to give many years of reliable 
service, provided they are properly maintained and cared for. These are our recommen-
dations to make sure that your bathroom stays looking good:

Vitreous China – Ceramic toilets, cistern tanks

Do’s

Use warm soapy water, cream or liquid cleaner.
Occasional use of mild bathroom lime scale removers is acceptable.
Use in accordance with manufacturers instructions, rinsing well with plenty of water.
Inlet valve filter to be cleaned regularly.

Don’t

Do not put bleach products in the cistern – this can damage the internal fittings.
It is acceptable to use in the toilet bowl itself.
Never put strong cleaner or bleach in overnight.
Never mix different cleaners in the WC – they can react to give off poisonous gas.

Plastic WC Seats

Do’s

Clean immediately after use to stop a build up of dirt and scale.
Use warm soapy water, Cif cream cleaner or Domestos Multi Active surface cleaner.
Polish out minor scratches and abrasions with a mild polishing compound.

Don’t

Never leave pools of soap, shampoo or cleaning detergent (please see
above) – these can cause permanent stains.
Never let cigarettes/flames near - your seat can burn and melt.
Never use household chemicals – a range of products such as paint stripper, nail varnish 
remover, household bleach, perfume, aftershave or strong disinfectant.
We cannot recommend the use of any scouring products or cream cleaners other than Cif.
Never mix different cleaners on your seat – they can react to give off poisonous gas.

We pursue a policy of continuing improvement in design and performance of our products. The right is, therefore, 

reserved to vary specifications without notice.

CUSTOMER CARE HELPLINE

0870 1258905

FAX LINE 01482 499611

email: [email protected]

Содержание Waverley











Отзывы: