19
9
TEMPERATURE ADJUSTMENT
If the mixer is not discharching 40°C water when the temperature handle is parked & aligned with the
body, then (if desired) this can be adjusted as follows:
1-2.
First remove the temperature control handle (left side) as detailed in section
16, steps 1 to 3.
3.
Before sliding the handle off, ensure the dot on the handle is inline with the 40 marker on the mixer.
4.
Slide the handle off the spindle.
5
. Slide off the plastic bush from the drive spindle.
6.
Turn on the mixer, position a thermometer in the running water. When the temperature settles,
rotate the drive spindle of the thermostat until 40°C is achieved.
Without disturbing the drive spindle position, refit the bush & handle. Ensure dot is aligned to the 40
marker.
4
6
5
40°C
6
1
40°C
T
3
2
1
