background image

1 of 3

CI350X01R1_A

304 Series™

LED Parking Structure

Direct, Hook and Cord, Pendant and Adjustable Mount

INSTALLATION INSTRUCTIONS

INSTRUCTIONS D’INSTALLATION

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed 

including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1.  DANGER

- Risk of shock- Disconnect power before installation.

DANGER

 – Risque de choc – Couper l’alimentation avant l’installation.

2.  This luminaire must be installed in accordance with the NEC or your local electrical 

code. If you are not familiar with these codes and requirements, consult a qualified 

electrician. 

Ce produit doit être installé conformément à NEC ou votre code électrique local. 

Si vous n’êtes pas familier avec ces codes et ces exigences, veuillez contacter un 

électricien qualifié.

3.  When handling, hold luminaire on sides to prevent damage to the top screen or 

LED’s.

4.  Take care to keep the LED lenses clean during installation.

SAVE THESE INSTRUCTIONS FOR FUTURE 

REFERENCE

TO INSTALL:

DIRECT MOUNTING

STEP 1: 

Remove the junction box mounting bracket from the 
luminaire by loosening (2) screws and sliding it out of 
the channels of the luminaire support bracket. See 

Figure 1 and 3.

STEP 2: 

Attach the junction box mounting bracket to the 
customer supplied junction box using the customer 
supplied screws. 

STEP 3:

Temporarily hang the luminaire from the hook-shaped 
projection on the junction box mounting bracket. See 

Figure 2.

 

STEP 4:

Make wiring connections per the 

Electrical 

Connections

 section.

STEP 5:

Secure the cord plate/gasket assembly to the junction 
box mounting bracket using (2) supplied screws.

STEP 6:

Remove the luminaire from the junction box mounting 
bracket and slide the channels on the luminaire 
support bracket onto the flanges of the junction box 
mounting bracket. See 

Figure 3.

STEP 7:

Secure the luminaire to the bracket using the (2) 
screws that were loosened in Step 1.

1

2

3

Junction Box

Mounting Bracket

Luminaire Support

 Bracket

Loosen (2) 

Screws

Hook-shaped

Projection

Luminaire Support

 Bracket

Junction Box

Mounting Bracket

Junction Box

Mounting Bracket

Отзывы: