2 of 3
CI350X01R1_A
PENDANT MOUNT
NOTE:
Ensure that the customer supplied pendant is
capable of supporting the weight of the luminaire.
STEP 1:
Size the pendant and locate the junction box accordingly.
Install a suitable Listed cord strain relief bushing in the
junction box, and feed the luminaire’s supply cord through it.
Tie an overhand knot in the cord inside the junction box.
STEP 2:
Make wiring connections to the cord and supply wiring per
the
Electrical Connections
section.
STEP 3:
Attach the junction box cover/pendant assembly to the
junction box using customer supplied screws.
STEP 4:
Secure the pendant to the luminaire mounting bracket using
a customer supplied suitable conduit fitting. See
Figure 4.
HOOK AND CORD MOUNTING
STEP 1:
Push down on retainer spring until top of spring is free of
luminaire hook. See
Figure 5.
STEP 2:
Slide hook into securely mounted customer supplied eye
hanger and return retainer spring to original position.
NOTE:
The luminaire should already be factory set for
correct balance. However, should you need to, the luminaire
may be balanced by loosening the hook adjustment set
screw on the top of the housing and sliding the hook as
necessary for correct balance. Tighten hook set screw when
finished. See
Figure 5.
STEP 3:
Install a suitable Listed cord strain relief bushing in the
junction box, and feed the fixture’s supply cord through it. Tie
an overhand knot in the cord inside the junction box.
STEP 4:
Make wiring connections to the cord and supply wiring per
the
Electrical Connections
section.
ADJUSTABLE MOUNT
STEP 1:
Secure the top of the Adjustable Arm to mounting surface
with screws (not supplied).
STEP 2:
Make wiring connections per the
Electrical Connections
section.
4
Luminaire Mounting
Bracket
Conduit Pendant (Customer
Supplied)
Conduit Fitter (Customer
Supplied)
5
Hook Adjustment Set
Screw
Retainer Spring
6
Adjustment Arm