Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The 61-796 Three Pole Ground Resistance Tester contains parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
Precautions and Safety Information
Use the meter only as described in the
Users Manual
. If you do not
do so, the protection provided by the meter may be impaired.
Read the “Safety Information” page before servicing this product.
In this manual, a
Warning
identifies conditions and actions that
pose hazard(s) to the user; a
Caution
identifies conditions and
actions that may damage the meter or the test instruments.
The Symbols
The symbols used on the meter and in this manual are explained in Table A.
Table A. Symbols
Meter Safety
Symbol
Description
Battery
Cautionary or important information in manual
Danger - Risk of electrical shock
Double Insulation- Protection Class II
CAT III
IEC Over-voltage Category III
SAFETY
Review the following safety precautions to avoid injury and prevent damage to this product or any products
connected to it. To avoid potential hazards, use the product only as specified.
CAUTION.
These statements identify conditions or practices that could result in damage to the equipment or other property.
WARNING.
These statements identify conditions or practices that could result in personal injury or loss of life.
Before beginning read all warnings and precautions stated in the
“Instruction Manual”
Form number TM61796
Rev 2 May 2008
