Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The 61-724 contains parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
www.idealindustries.com
SAFETY
Review the following safety precautions to avoid injury and prevent damage to this product or any
products connected to it. To avoid potential hazards, use the product only as specified.
CAUTION.
These statements identify conditions or practices that could result in damage to the equipment or other
property.
WARNING.
These statements identify conditions or practices that could result in personal injury or loss of life.
Specific precautions
Use proper Fuse.
To avoid fire hazard, use only the fuse type and rating specified for this product.
Do not operate without covers.
To avoid personal injury, do not apply any voltage or current to the
product without the covers in place.
Electric overload.
Never apply a voltage to a connector on the product that is outside the range specified
for that connector.
Avoid electric shock.
To avoid injury or loss of life, do not connect or disconnect probes or test leads
while they are connected to a voltage source.
Do not operate in wet/damp conditions.
To avoid electric shock, do not operate this product in wet or
damp conditions.
Form number TM61724
Rev 2 Sept 2006