Ideal Heating LOGIC SYSTEM S15IE страница 72 Скачать руководство пользователя

Страница: 72 / 80

Technical Training

Our Expert Academy offer a range of training options designed and delivered by our experts in heating.

For details please contact:

expert-academy.co.uk

The code of practice for the installation, commissioning

& servicing of central heating systems

Ideal is a trademark of Ideal Heating.

Registered Office

Ideal Boilers Ltd., National Avenue, Hull, East Yorkshire, HU5 4JB

Tel 01482 492251 Fax 01482 448858

Registration No. London 322 137

Ideal Technical Helpline: 01482 498663

Ideal Consumer Helpline: 01482 498660

Ideal Parts: 01482 498665

idealheating.com

Ideal Boilers Ltd., pursues a policy of continuing improvement in the design and performance of its products.

The right is therefore reserved to vary specification without notice.

Manufactured under

an ISO 9001

registered quality

management system

FM 59915

At Ideal Heating we take our environmental impact seriously, therefore when installing any Ideal Heating product please make sure to dispose of any

previous appliance in an environmentally conscious manner. Households can contact their local authority to find out how.

See https://www.gov.uk/managing-your-waste-an-overview for guidance on how to efficiently recycle your business waste.

WEEE DIRECTIVE 2012/19/EU

Waste Electrical and Electronic Equipment Directive

• At the end of the product life, dispose of the packaging

and product in a corresponding recycle centre.

• Do not dispose of the unit with the usual domestic refuse.

• Do not burn the product.

• Remove the batteries.

• Dispose of the batteries according to the local statutory

requirements and not with the usual domestic refuse.

EU Authorised Representative:

Atlantic SFDT

44 Boulevard des Etats-Unis, 85 000 La Roche-Sur-Yon, France

+33 (0)2 51 44 34 34

Содержание LOGIC SYSTEM S15IE

















































































Результаты поиска

Содержание LOGIC SYSTEM S15IE

Отзывы:

Похожие инструкции для LOGIC SYSTEM S15IE

Бренды по названию

Популярные бренды

Ideal Heating LOGIC SYSTEM S15IE, Установка и обслуживание

Результаты поиска

Содержание LOGIC SYSTEM S15IE

Отзывы:

Похожие инструкции для LOGIC SYSTEM S15IE

Бренды по названию

Популярные бренды