The following steps will get you set up in just a few minutes.
Please read each step carefully. If you have any questions, please
refer to our website at www.IdealH2O.net for information and
videos on setup & maintenance.
Step 1 – Check tubing connections on unit:
To prevent any issues with installing your RO system, we have pre-installed all of the
tubing in the correct inlet and outlet fittings. However, the tubes may have come
loose during shipping. Please double check all tube connections throughout the
system. With one hand, hold the fitting while pushing the tubing firmly (fig. C).
Doing this will prevent leaks in the system.
QUICK OPERATION GUIDE
(fig. C)
Check all tube
connections
6
