1
PREMISE
This manual indicates the intended use of the unit and provides instructions for transporting, installing, mounting,
adjusting and using the unit. Provides information for maintenance interventions, spare parts ordering, residual
risks and staff training.
The user and maintenance manual must be read and used as follows:
-
Each operator and personnel assigned to use and maintenance of the unit must read this manual
completely and with the utmost attention. He needs to respect what is reported;
-
The employer is obliged to ensure that the operator possesses the aptitude requirements for running the
unit and has carefully read the manual; The employer must also accurately inform the operator about
the risks of injury and in particular about the risks deriving from noise, about the personal protective
equipment provided and about the general accident prevention rules envisaged by international laws
or standards and the country of destination of the unit;
-
The manual must always be available to the user, managers, persons in charge of transport, installation,
use, maintenance, repair and final dismantling;
-
Keep the manual in areas protected from humidity and heat and consider it an integral part of the unit
for its entire duration, handing it over to any other user or subsequent owner of the unit;
-
Make sure that any updates received are incorporated into the text;
-
Do not damage, remove, tear or rewrite the manual or parts of it for any reason, in case it is lost or partially
damaged and therefore it is no longer possible to read its contents completely, it is recommended to
request a new manual to the manufacturer by communicating the machine serial number on the data
plate.
Pay close attention to the following symbols. Their function is to emphasize particular information such as:
With reference to serious dangerous situations that can occur when the unit is used to ensure safety
for people.
With reference to dangerous situations that may occur with the use of the unit to avoid damage to
things and to the unit itself.
With reference to additions or suggestions for the correct use of the unit.
The manufacturer has the right to update production and manuals, without the obligation to update previous
versions, except in special cases.
This manual reflects the state of the art at the time the unit was placed on the market and cannot be considered
inadequate only because it is subsequently updated on the basis of new technologies.
To request any updates to the user manual or additions, which will be considered an integral part of the manual,
send the request to the addresses given in this manual.
Contact the manufacturer for further information and any suggestions for improvement of the manual.
The manufacturer invites, in case of sale of the unit, to indicate the address of the new owner to facilitate the
transmission of any additions to the manual to the new sender.
1.1
RESPONSIBILITY
The unit is guaranteed according to the contractual agreements stipulated at the sale.
The manufacturer considers himself exempt from any liability and obligation, and the form of guarantee provided
for in the sales contract for any accident to persons or things that may occur due to:
- failure to observe the instructions contained in this manual with regards to operation, use,
maintenance and events which are in any case unrelated to the normal and correct use of the unit;
Содержание KERS 25
Страница 20: ...13 NOTE ...
Страница 21: ... ...
