OTHER COMPONENTS
78
37.3 Switching the lights on and off
WARNING
Risk of accident and injury!
Riding with inadequate lighting or without any lighting makes it difficult for other
road users to see you and prevents you from spotting dangers (e.g. obstacles).
»
Always switch on the lights before riding in low visibility (e.g. fog, dusk) or in the
dark.
WARNING
Risk of accident and injury!
If you become distracted when switching on the lights while riding, there is an
increased risk of accident and injury.
»
Switch on the lights before setting out, or stop to switch on the lights.
WARNING
Risk of accident and injury!
If the beam of light from a headlight is too bright, it may dazzle oncoming road
users. There is a risk of accident and injury.
»
Adjust the headlight away from oncoming road users so that they are not
dazzled by the light.
Sidewall dynamo-powered lighting
• The light is enabled by pressing down on the pressure point on the dynamo so that the
dynamo rests against the side of the wheel.
• The light is disabled by pushing the dynamo away from the side of the wheel back to
its original position.
Hub dynamo light or separate battery
• The light is enabled by setting the on/off switch to position I (ON).
• The light is disabled by setting the on/off switch to position II (OFF).
Содержание PRISMA-810
Страница 1: ...BMIEEN22V01 Original Instructions EN 15194...
Страница 99: ...99 NOTES...
Страница 100: ...BMIEEN22V01...