Subject to technical changes | Valid from January 2021
50
OPERATION – CARE
CALEO HOT/NEUTRAL
03
3.4.8. Replacing the water filter (units with heating climate)
For units with a water filter, it must be replaced at regular intervals. The controller display shows when the filter needs changing.
When in the OFF state, the message “CHANGE WATER FILTER” is displayed. Proceed as follows:
1. Switch the unit off at least 45 minutes before starting to replace the filter. The unit must
have cooled down.
2. Hold the filter by means of the fins at the bottom and turn it anti-clockwise until it can be
removed.
3. Insert the new water filter and turn it clockwise until it is hand-tight.
4. Turn the water supply back on.
5. Press the buttons
2
and
4
simultaneously for 5 seconds while the unit is turned off to
acknowledge the message on the display (see Chapter 3.2.2).
6. After replacing the filter, check the filter head for leaks when the unit is started up forthe
first time.
Irrespective of the remaining capacity, the filter must be replaced no later than after 10 months of operation, or after not
being used for 4 weeks.
NOTE
Adjusting the water filter with the water quality.
Check that the water filter installed in the unit by default is suitable for the water quality on-site. This will prevent damage to
the installed components. If you have any questions, please contact your sales partner or the manufacturer (see Chapter 1.5).
CAUTION
Содержание Caleo
Страница 1: ...Operating Manual CALEO HOT BASIC Translation of the original Self contained 21A ...
Страница 21: ...21 NOTES CALEO HOT NEUTRAL ...
Страница 35: ...35 NOTES CALEO HOT NEUTRAL ...
Страница 56: ...56 NOTES CALEO HOT NEUTRAL ...