Ideal AKE Caleo, Руководство по эксплуатации

Страница: 11 / 56

Subject to technical changes | Valid from January 2021
11
CALEO HOT/NEUTRAL
1.8. General safety instructions
• Covers with warning signs may only be opened by authorised specialists.
• The unit must not be cleaned with a water jet.
• Supporting-heat components (radiant heaters including the housing) and primary-heat components (hotplate)
have very high temperatures when in operation and must not be touched.
• Protective covers and fixtures must not be removed; otherwise there is a risk of injury.
• The controller may only be opened by an authorised specialist.
• Air flows around the unit from improperly installed fans (e.g. air conditioners) or draughts must be prevented in
order to ensure perfect operation of the unit.
• The ambient temperature must not 25 °C, and the relative ambient humidity must not permanently
exceed 60%.
• The unit is not suitable for operation in entrance and outdoor areas.
• The unit must be protected against direct sunlight.
• The products displayed must be pre-heated to a core temperature of at least +85 °C or hotter before being pla -
ced in the unit.
• Sharp objects must not be kept loose in the unit; otherwise there is a risk of injury.
• All glass enclosures must be treated with the necessary care in order to prevent injuries from the glass breaking.
• Components and service fluids may only be replaced with original parts.
• Do not store any combustible or explosive products in the unit or close to it.
• During the assembly or installation, the unit must be covered adequately so that no contact with live parts is
possible.
• The installation environment must be stable in order to withstand the stresses of everyday operation.
• Steering and fixed-position casters must be checked and set to a stable position.
• It must not be possible to remove any coverings that are mounted during the installation without tools.
• After each cleaning, the unit must be checked for loose connections, shearing points and damage.
Any deficiencies that are discovered must be rectified immediately.
• Do not use the unit for any non-designated purposes.
• The unit must be installed away from heat sources in a low-dust and well-ventilated environment.
• The outside and underside of the unit must not be cleaned with a water hose or washing brush. Running water
must always be avoided in this area.
• Do not store any objects on the unit when it is in operation.
Generally the following safety provisions and obligations apply when handling the unit:
Technical changes to the unit may only be carried out by authorised specialists. This applies in particular to work on the
electrical installation and the mechanics.
Any change must be authorised by your supplier, service partner or the manufacturer. Furthermore, liability and warranty
claims are excluded in the event of non-compliance with proper use.
NOTE