Valid from: 11/2013 – Rev.: UKW & BAKERY (13A)
Subject to technical changes
Page 3 from 4
Overview or the software features
Display and setting the setpoint temperature
The setpoint temperature can only be changed by pressing buttons
SET
and
UP
or
SET
and
DOWN
at the same time. While pressing the buttons, the
changing setpoint temperature is displayed. After changing the setpoint
temperature and releasing the buttons, the actual temperature is displayed
again. This is the standard setting method.
Please note that the setpoint can only be changed within the set setpoint
limits
Access to USER setting
To activate parameterisation mode, press buttons
UP
and
DOWN
at the same
time. After approx. 3 seconds, the code word
will be displayed.
Press
UP
or
DOWN
to switch between code words
,
,
and
.
To offer an easy handling of the control unit we made a user level including predefined parameters.
USER LEVEL
By selecting code word
and entering the correct password
,
a list with some predefined parameters is
opened.
These parameters are
,
,
,
,
,
,
,
and
.