Ideal AKE BAK G-53, Руководство пользователя

Страница: 51 / 75

51 Valid from October 2014 Technical changes reserved
User manual
User manual
A
Part
Display cases with drawer element
Models BAK L and BAK SL, and series Green L and Green SL are equipped
with a drawer, which offers easy loading of the deck base from service side
with large products like cakes or similar.
Remove the drawer to clean evaporator and interior well ( picture 1 ). Pull out
the drawer to the end position, then lift up the drawer approximately 5 cm to
remove the whole drawer element from the display case (
picture 2 – showing
the telescopic rails). After removing the drawer you have to take out the stain-
less steel blind (
picture 3 ), then lift up the evaporator coil and fix it in up-position
( picture 4 – lock on left side of the handle). Now you have access to clean the
interior well and the evaporator coil.
It is important to keep all display doors closed. If the doors are not fully closed, an even temperature
will not be maintained within the display case.
Adjustable shelves
Your Brillant, respectively Smaragd display offers the possibility to adjust the shelves in height and angle (tilt able).
This allows you various presentations of the goods. You can adjust the shelves 1 step up and down (± 25 mm)
from the centre position.
Remove the glass
Before moving the shelf to another position
please remove the glass. Therefore lift up
the glass on customer side until the s/s lug
(U-profile protection on the glass) slips out
from the bracket – see pictures on right side..
Move the brackets
The shelf brackets are fixed with 2 tabs in the
slots. Upper tab is equipped with 2 notches
for level or slant position.
■
Lift up the bracket
■
Draw out the brackets
■
Insert the bracket in the new position
■
Choose level/slant position
1
2
4
3