adset.
While charging, the indicator will turn red; when charging is completed, the
red indicator will shut off or flashes red.
Note: Charging time is around 90~20 minutes.
For first time use, make sure to fully recharge the Headset up to 4 hours. After
a long time of not using it (around one month), while recharging, it takes a
while for the indicator to turn red.
While charging, please do not use the Headset.
Please use the original charger to recharge the Headset.
When the indicator flashes the red light, it means the battery is low, please
recharge the Headset right away.
Please recharge the Headset within the temperature range of -10 C° (+14 F°)
+45 C° (+113 F°).
5. Power On/Off
Press and hold the function button for 2~3 seconds, the power Plug charger
here5. will turn on after the indicator flashes the blue light 3 times.
To turn the power off, press and hold the function button for 2~3 seconds
until you see the red indicator flash 3 times.
Note:
While turning the Headset on, you will hear the “Du Du” sound from the recei
ver. The blue indicator light will flash 5 times, then 2 times, and after repea
ting this for 5 times, the indicator will flash the blue light every 3 seconds to
come into a standby mode.
While the Headset is turned on, it will automatically search for the paired
device. Under “ON” mode and within the effective range of 10 meters from
the Headset, the indicator will flash the blue light to indicate that it entered
the connecting mode.
When turning the headset off, you will hear one “Bi” sound followed by two
“Du” sounds, then the indicator will shut off after flashing the red light for a
few times.
6. Pairing the Headset (or any Bluetooth Device)
You must pair the Headset with your Bluetooth phone or any Bluetooth devi
ce before you use the Headset for the first time.
Ensure the Headset is off.
Press and hold the function button for 5 seconds until the blue indicator light
flashes with the red indicator light to enter the pairing mode.
Ensure your mobile phone has the Bluetooth function and start the Blueto
oth new device searching function. Please follow the instructions of your mo
- 11 -
