www.iddero.com
IDDERO HCx-KNX TOUCH PANELS – User Guide
39
Configuration Menu
The “Options” submenu selects the format of group addresses: Two levels (main group / address), or
three levels (main group / middle group / address).
The “Language” command selects the language for configuration software. The software will need to
be restarted for the changes to take effect.
Help Menu
You can check the configuration software version by using the “About...” command.
5.4 Project
Tree
The project tree shows the general structure of the current project.
When you select (left-click) any item in the tree, the configurable parameters for that item are
displayed in the parameter area.
Many sections and subsections allow for the insertion of new items. To do this, right-click on the
relevant section in the project tree and select the “Insert <item>” option from the pop-up menu. For
example, in order to insert a new map, right-click on the “Maps” section and select the “Insert map”
option from the pop-up menu.
To delete an existing item, right-click on the item you want to remove, and select the “Delete” option
from the pop-up menu. Alternatively, you can select the item in the project tree (left-click), and press
the Delete key.
You can also add or delete items in these sections through the list displayed in the parameter area
when the section is selected in the project tree.
The position of some items within the project tree can be changed (e.g. zones, pages, components).
To do this, right-click on the item you want to move, and select “Move up” or “Move down”.
5.5 Communication
Objects
Depending on the configuration of the various sections and items in the project, certain communication
objects will automatically be shown in the project tree.
When selecting a communication object in the project tree, the following information is displayed in the
parameter area:
-
Data size:
Data size (in bits or bytes) of the communication object.
-
KNX communication flags:
Displays the configuration of the flags governing the behaviour of the
communication object. Most of the time, there will be no need to modify the default configuration.
Please refer to the KNX standard documentation for additional information about the meaning and
operation of each flag.
-
Addresses:
Group addresses currently linked with the communication object.
