IdAutomation SC7USB 2D, Руководство по программированию

Страница: 98 / 137

Intercharacter Delay
To remove this delay, scan the Intercharacter Delay barcode, then
set the number of steps to 0. Scan the SAVE barcode.
Note: Intercharacter delays are not supported in USB serial
emulation.
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed
after the transmission of a particular character of scanned data. Scan
the
Delay Length barcode below, then scan the number of
milliseconds and the SAVE barcode. Next, scan the Character to
Trigger Delay barcode, then the 2-digit hex value for the ASCII
character that will trigger the delay.
User Specified Intercharacter Delay
To remove this delay, scan the Delay Length barcode, and set the
number of steps to 0. Scan the SAVE barcode.
94