TyPe 9 - wiring diagram
Page 12 of 19
ADS-TBSL-PL
20110120
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
Transponder Bypass
PASSLOCK
MOVE THE FOLLOWING ITEMS IN YOUR
SCHEMATIC WITH ALL LAYERS ON
USE THE FOLLOWING LAYER SPECIFIC ITEMS AS
WIRING AND TEXT TEMPLATES
CONNECT EITHER
IDATALINK
OR
STANDARD WIRING
IDATALINK (RS232) PORT REQUIRED
ON REMOTE STARTER. IF UNAVAILABLE
USE STANDARD WIRING METHOD
LEGEND
Wiring connections not required
when installed in iDatalink mode
* Wiring connection not required in
2-way iDatalink
BRO
WN OR
YELL
O
W
RED/WHITE
BLA
CK/WHITE
GREEN
CONNECTOR LOCATED
AT PK3+ MODULE
IGNITION
PINK
PAS
SL
OCK
WHITE OR PINK/BLA
CK
ACCESSORY (+) INPUT - BLUE/RED
(NC) BLUE/YELLOW
(NC) GREEN/RED
(NC) GREEN/YELLOW
PASSLOCK - GRAY/RED
GROUND - GRAY/YELLOW
DATA (SWC) - ORANGE
(NC) PINK/BLACK
IGNITION (+) INPUT - PINK
WHITE/BLACK - ACCESSORY PK3 SIDE
WHITE/RED - 12V INPUT
WHITE - GROUND
GROUND-OUTPUT WHEN RUNNING - BLUE/WHITE
(NC) NO WIRE
GROUND - BLACK
12V - RED
REMOTE
STARTER
CONSUMPTION WARNING
PLEASE ADVICE THAT THE MODULE CONSUMES APPROXI-
MATELY 30mA AT REST WHEN INSTALLED IN TYPE 9.
WE STRONGLY RECOMMEND THE INSTALLATION TYPE 10
PAIRED WITH THE OPTIONAL ADS-RNG GM3 WHICH WILL
REDUCE THE CONSUMPTION TO 7mA AT REST.
CONNECTOR LOCATED
AT THE IGNITION SWITCH
IDATALINK
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
Doc. No.: ##4684##
