tyPe 1 - wiring diagram
Page 3 of 9
ADS-AL(DL)-CH4
20110519
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
ALL IN ONE
Chrysler/DoDge/Jeep
REMOTE STARTER
OPTIONAL ->
OPTIONAL ->
OPTIONAL ->
YELLOW/BLACK - DOOR STATUS (-) OUTPUT*
GWR (-) INPUT - BLUE/WHITE
LOCK/ARM (-) INPUT - GREEN/BLACK
TRUNK STATUS (-) INPUT
DOOR STATUS (-) INPUT
YELLOW/RED - TRUNK STATUS (-) OUTPUT*
YELLOW - MULTIPLEX PARKLIGHTS OUTPUT
(NC) WHITE
(NC) BLACK
(NC) RED
UNLOCK/DISARM (-) INPUT - BLUE/BLACK
TRUNK (-) INPUT - RED/WHITE
DISARM ONLY (-) INPUT - BROWN
LEFT SLIDING DOOR (-) INPUT - PURPLE/YELLOW
RIGHT SLIDING DOOR (-) INPUT - PURPLE/BLACK
PARKING (+) INPUT - WHITE
STARTER (+) INPUT - BLACK/WHITE
*E-BRAKE (-) OUTPUT - GREEN
*TACH (AC) OUTPUT - PURPLE/WHITE
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
TRUNK (-) OUTPUT
DISARM ONLY (-) OUTPUT
RIGHT SLIDING DOOR (-) OUTPUT
LEFT SLIDING DOOR (-) OUTPUT
PARKING (+) OUTPUT
STARTER (+) OUTPUT
E-BRAKE (-) INPUT
TACH (AC) INPUT
BRAKE INPUT - ORANGE
12V INPUT - RED/WHITE
PARKLIGHTS (+) OUTPUT
IGNITION OUTPUT - PINK
GROUND INPUT - BLACK
UNLOCK (-) OUTPUT
LOCK (-) OUTPUT
GROUND WHEN RUNNING (-) OUTPUT
IF YOUR MODULE HARDWARE
IS VERSION 1.23 OR NEWER YOU
CAN ELIMINATE THE RELAY
AND CONNECT THE YELLOW WIRE
DIRECTLY TO THE VEHICLE.
IF YOUR MODULE HARDWARE
IS VERSION 1.23 OR NEWER YOU
CAN ELIMINATE THE RELAY
AND CONNECT THE YELLOW WIRE
DIRECTLY TO THE VEHICLE.
WARNING
USE THIS OUTPUT ONLY ON
VEHICLES EQUIPPED WITH
MUX PARKING LIGHTS CONTROL
WARNING
USE THIS OUTPUT ONLY ON
VEHICLES EQUIPPED WITH
MUX PARKING LIGHTS CONTROL
DO NOT USE THE RED/WHITE
WIRE IF YOU ARE PLANNING
TO POWER THE VEHICLE
POSITIVE PARKLIGHTS WIRE.
DO NOT USE THE RED/WHITE
WIRE IF YOU ARE PLANNING
TO POWER THE VEHICLE
POSITIVE PARKLIGHTS WIRE.
ONLY WHEN RAP
SHUTDOWN IS REQUIRED
ONLY WHEN RAP
SHUTDOWN IS REQUIRED
86
30
87
87A
85
THE BRAKE STATUS WIRE IS FUNCTIONAL
ONLY WHEN THE IGNITION IS POWERED
THE BRAKE STATUS WIRE IS FUNCTIONAL
ONLY WHEN THE IGNITION IS POWERED
F
E D
A
B
C
G
OR
G
VEHICLE HARNESS
A
B
C
F
D
E
G
VEHICLE HARNESS
A
B
C
D
E
F
VEHICULE P
ARKLIGHTS MUX WIRE
VEHICLE (-)
DRIVER DOOR PIN
REARM (-) OUTPUT
IDATALINK (RS232) PORT REQUIRED
ON REMOTE STARTER. IF UNAVAILABLE
USE STANDARD WIRING METHOD
LEGEND
Wiring connections not required
when installed in iDatalink mode
* Wiring connection not required in
2-way iDatalink
IDATALINK
CONNECT EITHER
IDATALINK
OR
STANDARD WIRING
IDATALINK
IDATALINK
IDATALINK
ADS-HRN CH4 ASSEMBLY - SOLD SEPARATELY
ADS-HRN CHTIP ASSEMBLY - SOLD SEPARATELY
1N4001
DIODE
!
REFER TO ADS-HRN CHTIP*
ASSEMBLY FOR PROPER
CONNECTIONS AND MATCH
EACH LETTER ACCORDINGLY
REFER TO ADS-HRN CHTIP*
ASSEMBLY FOR PROPER
CONNECTIONS AND MATCH
EACH LETTER ACCORDINGLY
WARNING
THE DIODE IS ONLY REQUIRED FOR THE ADS-HRN CH4 ASSEMBLY
THE DIODE IS NOT REQUIRED FOR THE ADS-HRN CHTIP ASSEMBLY
WARNING
THE DIODE IS ONLY REQUIRED FOR THE ADS-HRN CH4 ASSEMBLY
THE DIODE IS NOT REQUIRED FOR THE ADS-HRN CHTIP ASSEMBLY
Doc. No.: ##5401##