iData 95UHF UserManual
- 25 -
Fault
Cause
Solution
The
iData
95UHF
responds
at
a
low
speed.
Too many files are stored in
the iData 95UHF.
Remove unused memos and records. If
necessary, save the records on the host or
increase the storage capacity by using an
SD card.
Too many applications are
installed
on
the
iData
95UHF.
Remove applications installed on the iData
95UHF.
The iData 95UHF does
not decode barcodes.
The scan application is not
loaded.
Load iScan in the iData 95UHF.
Reading a barcode fails.
Check that the barcode is defective.
The battery volume is low.
If the scanner stops sending out laser beam
after you turn on the switch, check the
battery volume.