ID View IV-PDV3122MP, Инструкция по эксплуатации

Страница: 14 / 75

Camera Installation
Method 2 - Camera Base Install
2b. Use the included mounting template (Installation Option 1) to mark and
pre-drill the required holes.
2c/2f
2d
2g
2c. Remove the camera
base by unscrewing the 3
base locking screws, and
turn camera module
approx. 5 degrees
counterclockwise to detach
camera base from the
camera module.
2d. Install the base to the
correct holes as indicated
on the mount template
using
the 1.2” screws.
Go to step 3a to complete
installation.
Method 3 - Junction Box
Install
2e. Attach provided fitting
plate to junction box (see
“5.
Junction Box Installation
Type
s” on page 11).
2f. Remove the camera
base by unscrewing the 3
base locking screws, and
turn the camera module
approx. 5 degrees
counterclockwise to detach
camera base from camera
module.
2g. Install the base to the
junction box plate using the
base fitting screws.
Go to step 3a to complete
installation.