12
14
15
﹣
RETURN : (RET/END)
‧
RS485 : (Communication adjust menu )
This function sets up the camera communication status when
controlling the camera through an external control device.
﹣
CAM ID : 0 ~ 255
﹣
ID DISPLAY : Display camera title on the screen.
﹣
BAUD RATE : 2400 / 4800 / 9600 / 19200 / 38400 bps.
﹣
RETURN : (RET/END)
‧
VERTION : 000000
‧
RETURN : (RET/END)
‧
DEFECT :
﹣
LIVE DPC : Dead pixel compensation on live.
﹣
LEVEL : 0 ~ 60.
﹣
STATIC DPC : Dead pixel compensation on static.
﹣
START : Close the lens then press the enter key.
﹣
LEVEL : 0 ~ 60.
﹣
SENS-UP : When it is night or dark, the camera automatically
detects the light level and maintains a clear picture
if this mode is activated.
•
D-EFFECT : Select this to adjust the image.
﹣
FREEZE : OFF/ON
﹣
MIRROR : OFF/MIRROR/V-FLIP/ROTATE
﹣
D-ZOOM : x 2.0~64.0. (Analog video no picture when D-Zoom ON)
﹥
PIP : ON/OFF
﹥
D-Z00M : x 2.0~64.0
﹥
PAN&TILT : PIP / D-ZOOM
﹥
DEFAULT : Reset the D-ZOOM setting to the factory default.
﹣
NEG. IMAGE : Yan can make the negative image effect.
﹣
RETURN : (RET/END)
‧
MOTION : If you connect an alarm device to this camera, you can monitor
activity more efficiently, because a signal is generated by the
camera whenever motion detection signal is output through the
MD OUT port.
﹣
SELECT : You can select up to 3 area.
﹣
DISPLAY : (OFF/ON) You can use
↑, ↓, ←, →
to adjust POSITION and SIZE.
﹣
SENSITIVITY : 0 ~ 60.
﹣
MOTION VIEW : ON/OFF
﹣
DEFAULT : Reset the motion setting to the factory defaults.
﹣
RETURN : (RET/END)
‧
PRIVACY : Hide an area you want to hide on the screen.
﹣
SELECT : You cam select up to 8 area
﹣
DISPLAY : Determines weather to use the area selected. You can use
↑, ↓, ←, →
to adjust POSITION and SIZE.
﹣
COLOR : Determines area color. You can select 16 kinds of color.
﹣
DEFAULT : Reset the privacy setting to the factory defaults.
﹣
RETURN : (RET/END)
‧
LANGUAGE : You can select the menu language according to your
requirement.(ENG / JPN / CH1)
•
SHARPNESS : As you increase this value, the picture outline becomes
stronger and clearer. Adjust this appropriately depending
on the sharpness of the picture.
•
MONITOR : LCD / CRT monitor.
﹣
LCD MONITOR :
﹥
GAMMA : USER / 0.45 / 0.50 / 0.55 / 0.60 / 0.65 /0.70 / 0.75 / 0.80 / 0.85
/ 0.90 / 0.95 / 1.00 value.
﹥
BLUE GAIN : 0 ~ 100.
﹥
RED GAIN : 0 ~ 100.
﹥
RETURN : (RET/END)
﹣
CRT MONITOR :
﹥
BLACK LEVEL : -30 ~ +30.
﹥
BLUE GAIN : 0 ~ 100.
﹥
RED GAIN : 0 ~ 100.
﹥
RETURN : (RET/END)
•
OSD :
﹣
TEXT COLOR : You can select 0 to 8 text color.
﹣
OUTLINE : ON/OFF
﹣
RETURN : (RET/END)
•
LSC : (Lens Shielding Compensation)
•
NTSC/PAL : You can select NTSC / PAL system.
•
RETURN : (RET/END)
Press the SET button in the EXIT menu to save the current setting and exit the
SET menu.
•
FACTORY : Reset the camera setting to the factory defaults.
•
RETURN : (RET/END)
13
►If you press the SET button in “x3” or “x2” mode, you can
adjust brightness by increasing or decreasing the shutter speed.(x2~x3)
►Note that the higher the zoom level, the brighter the screen, but the more
likely it is that an after-image will appear.
►Although Noise, Spots, and Whitish symptoms may occur in SENSE-UP
operation when the zoom level is increased, this is normal.
RS-485 controller
MAX: 300M
CAT5 CABLE
＊
Please do not use RS-485 controller to change camera ID
CAMERA SETTING
CAMERA ID :
Depending on ID S.W
BAUD RATE :
2400
PROTOCOL :
PELCO-D
