ID Photonics CoBrite DX1, Руководство пользователя, Страница: 9 / 44

___________________________________________________________________
Co Brite
DX1
User Manual
8
1.9.9 Do Not Remove the Instrument Cover
Operating personnel must not remove instrument covers. Component replacement
and internal adjustments must be made only by qualified personnel.
Instruments that appear damaged or defective should be made inoperative and
secured against unintended operation until they can be repaired by qualified service
personnel.
Opening the instrument will result in loss of all warranty given for the instrument and
may exhibit lethal health risks.
Keep away from live circuits inside the equipment. Operating personnel must not
remove equipment covers. Only factory authorized service personnel or other
qualified service personnel may remove equipment covers for internal subassembly
or component replacement or any internal adjustment. Do not install substitute parts
or perform any unauthorized modification of the equipment or the warranty may be
voided.
1.9.10 Ventilation
Keep a space of 30 cm or more between the rear side of the device and any other
objects such as walls to guarantee sufficient cooling of the device.
Never block the air fan and ventilation openings.
1.9.11 Cleaning the Instrument
To avoid personal injury, power down the device and disconnect it from line voltage
before performing any of the following procedures.
To clean the exterior surface, perform the following steps:
Remove loose dust on the outside of the instrument with a lint-free cloth.
Use a soft cloth dampened with water to clean the device. Use 75% isopropyl
alcohol solution as a cleaner. Do not use any abrasive or chemical cleaning
agents.