ID Photonics CoBrite DX1, Руководство пользователя, Страница: 11 / 44

___________________________________________________________________
Co Brite
DX1
User Manual
10
1.9.12.5 Do Not Directly View Optical Laser Port Output
Under no circumstances should you use any optical instruments to view the optical
laser port output directly.
1.9.12.6 Precautions with Connectors
It is essential to ensure that all optical connectors are in good condition. Dirty
connectors can lead to poor performance, while broken connectors can cause
damage to other equipment!
Before using a microwave connector, check it visually, using an optical microscope
(20x magnification is recommended). If the connector needs to be cleaned, swab it
with clean isopropyl alcohol. Dry the connector by blowing it with clean compressed
air or nitrogen.
Before an optical connector is used, check it visually by using an optical microscope
as recommended by the manufacturer of the connector. If the connector needs to be
cleaned, apply the cleaning procedure recommended by the manufacturer of the
connector.
Make sure you are familiar with these issues to avoid damage to your device and
possible violation of warranty.
Important!
Before connecting the inputs or outputs to any measurement equipment or device
under test, make sure that a suitable attenuator, if necessary, is fitted.