I.D. AL - VP100 Full HD 1080p video player - User manual
® Waves System
V 1.0 - 2010
3 - INSTALLATION
1
2
3
4
5
6
7
8
9
10
11
1 - USB Host connector to use a
USB flash memory or external hard
disk or all other media with «mass
storage» compatibility.
2 - SD connector to use a SD/
SDHC memory card.
3 - Infrared sensor
4 - Volume buttons
5 - Status LED (red = sleep, orange
= initialising, green = operationnal)
6 - Sleep / wake up
7 - Power supply input
8 - VGA output (analog)
9 - HDMI output (digital)
10 - Ethernet RJ45
11 - Analog stereo audio output
- 5 -
4 - Operating mode
4.1 -First use
The VP100 is delivered with default parameters. You need to change some parameters for an optimal use
like video out resolution, Ethernet link, time and date ...
1 -Connect the VP100 to a display using HDMI or VGA out. Connect the power supply but don’t insert a
media (SD or USB). Status LED change from red to orange and green for about 1 minute. Main menu is
now displayed.
2 -With the remote control, select «Setup» and change the parameters you want. (see the Setup chapter)
Note : By default, the VP100 is set in Full HD output resolution (1920x1080). If your display is not compatible
with this resolution, you need to change the resolution. At this moment, may be, you can’t see anything on
the screen. Don’t worry, you can change dynamicaly the resolution using the «ACT» key on the remote
control.
