ID-AL ChronoPlayer, Руководство пользователя

Страница: 10 / 52

ID-AL ChronoPlayer - User Guide V1.0
The SD cards or the USB flash drives used with the ChronoPlayer need to be properly prepared. For more
information regarding the preparation of the storage device, see the chapter Storage Device Preparation and
Update.
2. Connect speakers or a sound system to the audio output and switch the player on thanks to the PSU.
Power Supply Unit: It is recommended to use the mains adapter provided with the player. If another PSU or a
battery is used, the specified voltage range must be respected (see the chapter Characteristics). The power
consumption depends on the power level of the amplifier.
3.1 Connection of the Inputs
The 8 inputs are used to trigger the playback of folders. An input is activated if it is connected to the ground
of the player. The states of all the inputs are combined to form a binary code identifying the folder to play.
Triggering devices can be connected to these inputs in one of two ways:
•
Up to 8 triggering devices directly connected to the player inputs. In that case, the associated folders
are 001, 002, 004, 008, 016, 032, 064, and 128.
•
Up to 255 triggering devices connected to the player inputs through a circuit encoding their ID. In
that case, the associated folders are 001 to 255. Such an encoding circuit can be made out of
diodes. An optional extension board interfacing up to 15 triggering devices to the player inputs is
available.
-10- © 2016, Waves System
Note: If both an SD card and a USB flash drive are connected, the SD card has the priority, and the USB
flash drive is not used by the player.