Manual IB-DK2102-C
USB Type-C
™
Not all USB Type-C
™
ports support the full functionality of the USB Type-C
™
standard. Some ports
might only provide data transfers, and might not support video or Power Delivery over USB. To use
this dock to its full potential, ensure that the host USB Type-C
™
port from your computer supports
DisplayPort
™
Alt Mode, as well as USB Power Delivery or Thunderbolt 3
™
.
Note
! The USB Type-C
™
port on the DockingStation supports only Power Delivery 3.0.
Install and use the docking station
The dock will automatically install some of the required drivers once it is connected to your laptop’s
USB Type-C
™
port. If you receive a prompt to automatically install the driver(s), follow the on-screen
instructions to complete the installation.
Connect your devices to the appropriate ports on the dock. Connect your external display(s) to the
dock’s video port(s).
Note
: Video output capabilities are dependent on the video card and hardware specifications of
your connected host laptop. Certain video cards have limited MST support, while some monitors
will also limit the available resolution.
Configure a display device
Please setup your display settings accordingly to your operating system and requirements. For
detailed information, see the corresponding operation manual and description of your operating
system. Your laptop hardware must support dual external displays (e.g.: MST). You can set up dual
displays by using the video output ports (1x Mini DisplayPort
™
and 1x HDMI
®
or 1x Mini Display-
Port
™
and VGA).
Supported video resolutions
The docking station supports 4K HD resolution if the connected HDMI
®
or DisplayPort
™
display
supports it.
Number of displays Video output configuration
Maximum resolution/monitor
2
mini DisplayPort
™
and HDMI
®
1920x1080@60Hz
2
mini DisplayPort
™
and VGA
1920x1080p@60 Hz
1
mini DisplayPort
™
3840x2160p@30 Hz
1 HDMI
®
3840x2160p@30
Hz
1 VGA
1920x1200p@60
Hz
