Manual IB-289-C3
Attention:
Write down your chosen password and store it in a safe place to
prevent misuse. It is
NOT
possible to recover the contents of the drive if you have
forgotten and/or lost the password!
7.
Complete the setup of the drive (initialize and format) under the disk
management of your operating system.
Change password
1.
Keep the
Lock
key pressed and then connect the encrypted device to
your running host computer via USB cable.
2.
Keep the
Lock
key pressed and wait for 10 seconds until the red LED
and orange LED shine at the same time. Then release the
Lock
key.
3.
Enter the existing password, then press the
Unlock
key to confirm: at
this time the orange LED turns off.
4.
Enter a NEW password, then press the
Unlock
key to confirm.
5.
Enter your NEW password again, then press the
Unlock
key to confirm. The red LED turns off, the green LED shines.
The password change was successful.
Attention:
Write down your chosen password and store it in a safe place to
prevent misuse. It is NOT possible to recover the contents of the drive if you have
forgotten and/or lost the password!
ATTENTION! Important information
•
If the password is entered incorrectly more than 99 times, data on
the installed drive is blocked permanently for security reasons and not
accessible anymore!
Содержание IB-289-C3
Страница 19: ......