1
This manual describes the installation process for the ICU EVe charging point
for electric vehicles. Carefully read this manual before you install the charging
point. ICU Charging Equipment and Alfen bv cannot be held liable for any
consequential damage and/or losses that may arise from the use of this
manual. This manual applies to the product types below:
Plug & Charge
4457.230V.50HZ.16A.1FNPE.2X16A.PUAST
4457.400V.50HZ.32A.3FNPE.2X16A.PMAT
4457.400V.50HZ.16A.3FNPE.1X16A.PMAT
4457.400V.50HZ.64A.3FNPE.2X32A.PMAT
4457.400V.50HZ.32A.3FNPE.1X32A.PMAT
RFID + RFID Display
4457.400V.50HZ.32A.3FNPE.2X16A.RMAST
4457.400V.50HZ.16A.3FNPE.1X16A.RMAST
4457.400V.50HZ.64A.3FNPE.2X32A.RMAST
4457.400V.50HZ.32A.3FNPE.1X32A.RMAST
4457.230V.50HZ.16A.1FNPE.2X16A.DRUAST
4457.400V.50HZ.32A.3FNPE.2X16A.DRMAST
4457.400V.50HZ.16A.3FNPE.1X16A.DRMAST
4457.400V.50HZ.64A.3FNPE.2X32A.DRMAST
4457.400V.50HZ.32A.3FNPE.1X32A.DRMAST
The type number can be found on the identification label on the bottom side of
the product.
Safety
The electrical system must be dead (disconnected from the power
supply) during all installation and maintenance work.
Installation work must be performed by professionals who are familiar
with this manual and work based on the IEC-60364 regulations.
Work may not be performed when it is raining or the air humidity is higher
than 95%.
Never connect more than one charging object per group.
