8
protocol, baud rate and camera type from the camera tracking controller. Please check if
the settings of the protocol, baud rate and camera type are as same as the real
connection settings.
Dial the 1
st
bit to select VISCA protocol.
Dial the 2
nd
bit to select SAMSUNG protocol.
Neither the 1
st
bit nor the 2
nd
bit is dialed, which means to select Pelcd_D protocol.
Dial the 3
rd
bit to select the baud rate of the camera at 2400.
Dial the 4
th
bit to select the baud rate of the camera at 4800.
Dial both the 3
rd
and 4
th
bits to select the baud rate at 19200.
Neither the 3
rd
nor the 4
th
bit is dialed, which means to select the baud rate at 9600.
For ceiling camera installation, the 5
th
bit shoule be dialed; for wall mounted camera
installation, the 5
th
bit should not be dialed.
3. Camera address setting
Input the corresponding camera address here to control the
corresponding cameras through following control keys. Notice: the camera address, vedio
channel and camera address code must be the same to make sure the correct controlling.
