10
5.2 Controlling the different address cameras
Changing the phisical address of the cameras and controlling the rotation from the PC
software to realize mutiple cameras on-line using.
5.3 System on-line testing
Connecting two conference controllers, 9 units of TS series delegates, 9 units of TH series
delegates and the PC, then turn on the PC software. Setting the ID number on the
delegates and the pre-setting of each delegate. Then begin the microphone testing.
Checking if the camera rotation is correct or not when turning on several delegates or
turning off several delegates. There are several standards to judge if the rotation is correct
or not.
1) TS series and TH series conference systems should be tested interdependent, which
could not be tested as the same system.
2) For example, when turning on the 1
st
, 2
nd
, 3
rd
, 4
th
, 5
th
delegate continuously, the camera
will point to the 5
th
delegate. When the 5
th
delegate is turned off, the camera will point to
the 4
th
delegate; Switching off the delegates in turns, the camera will point to the
panoramic position. (The panoramic position should be setted by the PC software;
adjusting the camera position and then click it)
3) For example, when turning on the 1
st
, 2
nd
, 3
rd
, 4
th
, 5
th
delegate continuously, the camera
will point to the 5
th
delegate. Then switching off the 2
nd
, 3
rd
, 4
th
delegates, the camera
position will not be changed. Then turn off the 5
th
delegate, at this time the camera will turn
to the 1
st
delegate.
4) For example, when turning on the 1
st
, 2
nd
, 3
rd
, 4
th
, 5
th
delegate continuously, the camera
will point to the 5
th
delegate. Then press the priority key of the 6
th
delegate, all the
delegates will turn off the mic and the camera will turn to the 6
th
delegate. Both TS and TH
delegates are in the same testing.
