2
5
9
Set Logging Options
9.1
Probe Selection
The SFM1 by default has both the inner and outer measurement points enabled.
From within the SD Card logging options the SFM1 can be configured to use the
inner, outer or both at the same time. These options are useful when working
with small stems as typically the needles are pushed all the way through to
reduce mechanical strain on the needles
.
In this case only the outer measurement
point would need to be used.
For reference
:
T
he Inner measurement point is at 7.5mm from the tip of the neede
and the Outer measurement point is at 22.5mm from the tip.
9.2
Calculated Results
The SFM1 can log and process raw data on board the instruments
Microprocessor. To do this, simply check all the boxes for calculated results
within the SD Card loggin
g
options menu
. Whilst the SFM1 will
process
and
log
the
data
to
file
,
for
the
data
to
be
meaningful
you
must
have
entered all the
necessary
correction parameters
(page
29
)
first
.
ICT International
Enabling better global research outcomes in soil,
plant & environmental monitoring.
