manualshive.com logo in svg

ICT Protege PRT-ENTR-17, Руководство по установке, Страница: 25 / 56

Поделиться
Скачать
ICT Protege PRT-ENTR-17 Скачать руководство пользователя страница 25

Device Settings

From the

Device Settings

menu, you can configure the entry station's network settings.

Network Configuration

This tab allows you to edit the IP address and other connection settings of the entry station.

Programming the IP address, subnet mask, and default gateway requires knowledge of the network and subnet
that the system is connected to. You should always consult the network or system administrator before
programming these values.

1.

Navigate to the

Device Settings

menu and select the

General

tab.

2.

If you require the entry station to request its network configuration settings from a local DHCP server, select
the

DHCP client enabled

option. The remaining network settings will then become unavailable.

3.

Enter the

IP Address

of the entry station.

The default is 192.168.1.34

4.

Leave the DNS IP field blank. This is reserved for future use.

5.

Enter the

Network Mask

used by the entry station. The network mask is used in conjunction with the above IP

addresses. A network mask must be configured to allow access to the appropriate node on the subnet. By
default this is set to a value of 255.255.255.0

6.

Enter the

Default Gateway

used by the entry station. Use the gateway to allow access to a router for external

communications beyond the subnet where the entry station is located. By default this is set to a value of
192.168.1.1.

Changes to the default gateway field will require you to power cycle your entry station.

The

Controller

settings below are only required when integrating the entry station with a Protege GX or

Protege WX system. These options do not apply when the entry station is used in standalone mode. Refer to
the relevant integration section for Protege GX (see page 30) or Protege WX (see page 43) for full
programming details.

7.

The

Con IP Address

is the IP address of the controller that the entry station communicates with.

8.

The

Mod TX Port

is the port that the entry station communicates with the controller.

9.

The

Address

is the keypad address assigned to the entry station for door control.

The

Wiegand Output Configuration

settings below are only relevant when using the Wiegand output.

10.

For the

Wiegand Keypad Format

, select which Wiegand format the entry station should use when PIN codes

are entered via phone calls or the onscreen keypad.

11.

For the

Site Code

option, set which site code to use for Wiegand keypad formats that require a fixed site code

(26 Bit, 36 Bit IEI)

The

External Network

setting below is only relevant when using the entry station with the Protege Mobile

App.

12.

The

External JPEG Video Port

is used to configure which external port the Protege Mobile App uses to reach

the entry stations camera feed.

-

If the entry station is directly accessible via the internet, this should be set to 8080.

-

If the entry station has been port forwarded through a NAT, this should be set to the port number where

http://{ENTRIPADDRESS}:8080/video

is internet accessible.

13.

Click

Save

.

14.

If you have changed the

Default Gateway

, power cycle the entry station to implement the new setting.

PRT-ENTR-17 | Protege Vandal Resistant Touchscreen Entry Station | Installation Manual

25

Содержание Protege PRT-ENTR-17

























































Отзывы:

Нет отзывов