ELECTRIC BICYCLE METER KT
—
LCD10H Product User Manual
- 36 -
1
Weak assist strength of motor
2
General assist strength of motor
3
Stronger assist strength of motor
After finishing C14 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C15 parameter setting interface.
○
C15 Push-assist Speed Parameters Setting
Enter C15 parameters setting interface, C15 flashes.
C15 is the setting of push-assist speed, default value is 6, range from 4-6, press
(UP)
button or
(DOWN) button to choose
C15 parameters
C15valte
Push-assist speed
4
4Km/H
5
5Km/H
6
6Km/H
After finishing C15 parameter setting, hold
button
(SW)
shortly to save current
set values and enter C1 parameter setting interface again. Or hold
button
(SW)
long
for about 2 seconds to exit C parameter setting environment and return to the display 1. Or
hold
button
(UP)
and
button
(DOWN)
at the same time to enter L parameter
setting.
○
Exit Parameter Setting