ELECTRIC BICYCLE METER KT
—
LCD10H Product User Manual
- 16 -
minutes after boot-up.
○
Single Data Clearing
5 seconds after the meter is powered on, at display 1, hold both the
button
(UP)
and the
button
(DOWN)
simultaneously for about 2 seconds, the single trip time
(TM) and single trip distance (DST) flicker, then hold
button shortly
(SW),
the
record contents of both will be cleared.
Single data clearing display
Under the status of data flashing, if there were no operations on the data within 5
seconds, the meter will automatically return to display1 after 5 seconds, and the
original record content will be saved.
○
Automatically Prompt Interface
Error Code Display
：
When the electronic control system of the electric vehicle fails, and the meter will
automatically display (flicker) fault code. You can’t exit the fault code display only the
fault is removed.
Error Code Display
Error Code & Definition Table
：