![background image](http://html1.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_operators-manual_615089014.webp)
© 2022 ICS, Oregon Tool Inc. Specifications are subject to change without notice. REV071918~ F/N 74595
814PRO OPERATOR’S MANUAL
14
TROUBLESHOOTING
TROUBLESHOOTING
•
SLOW DIAMOND CHAIN SPEED
– Be sure the powerpack is providing the correct hydraulic
pressure and flow (8 gpm / 30 lpm at 2,500 psi / 172.5 bar).
•
POOR CUTTING SPEED
– The diamonds may be glazed over. Make a few cuts in an abrasive
material such as a cinder block to expose the diamonds.
•
PREMATURE CHAIN STRETCH
– Not enough water pressure. The minimum water pressure is
20 psi (1.5 bar). Insufficient water supply will result in excessive wear on the chain, which can lead
to loss of strength and chain breakage.
•
CHAIN TENSIONER BREAKAGE
– Side cover nuts are not tight enough.
Torque to 20 ft-lbs (27 Nm).
•
WATER NOT FLOWING
– Water hose is kinked or supply is not turned on.
•
MOTOR WON'T TURN
– Hydraulics are hooked up backwards or powerpack is set on reverse
flow.
Further questions?
Call 800.321.1240
or
visit our website at:
icsdiamondtools.com