ICS Endeavor Plus 810E, Руководство пользователя

Страница: 85 / 113

Peripheral Setup 4-29
BI
O
S Se
tu
p
Peripheral Setup
This section describes I/O resource assignments for all onboard peripheral devices.
Onboard IDE
This option specifies the onboard IDE controller channels that will be used. The settings are
Disabled , Primary , Secondary , and Both .
Onboard FDC
If you want to install a different add-on super I/O card to connect floppy drives, set this field to
Disabled . Otherwise, set it to Auto to have BIOS automatically determine if the floppy
controller should be enabled.
Onboard Serial Port A/Port B
These fields control the resource assignments of two onboard serial interfaces SIO1 and SIO2.
The following lists show current options in Onboard Serial Port A/ Port B :
Auto à cannot set serial I/O resources by manual operation
Disabled
à
indicates onboard COM port function is ineffective
3F8h/COM1
à
assign I/O address 3F8h to COM1
2F8h/COM2
à
assign I/O address 2F8h to COM2
3E8h/COM3
à
assign I/O address 3E8h to COM3
2E8h/COM4
à
assign I/O address 2E8h to COM4
Serial Port B Mode
This option controls the resource assignments of onboard Serial Port B. The Serial Port B Mode
Select has four settings:
Normal , IrDA 1.6us , IrDA 3/16 Baud , and ASK IR .
IR Duplex Mode
IR Duplex Mode has two settings: Half Duplex and Full Duplex.
IR Pin Select
IR Pin Select has two options: IRRX/IRTX and SINB/SOUTB.