Warranty:
The product is warranted against defects in material and workmanship while used in
normal service for a period of 1 year from the date of sale to the original customer.
The GEM policy is one of continual development and improvement; therefore GEM
reserves the right to change specifications without notice.
3.Enter 99 (Yellow LED stay on, 1 beep, Green LED flash) back to standby mode
(Blue LED stay on)
6. Adding PIN to Relay 1
a.
1.Enter programming mode to select slot position 000~999 (Green LED stay on
indicate the slot position is available)
2.Press 4-digit PIN (1 beep, Yellow LED stay on).
3.Press # (1 beep) back to standby mode (Blue LED stay on)
NOTE:
Master code must NOT be the same as PINs.
b.
1.Enter programming mode to select slot position 000~999 (Red LED stay on
indicate the slot position is unavailable)
2.Press
(1 beep) to delete the data from the slot position (Green LED stay on)
3.Press # (Yellow LED stay on) back to programming mode. Repeat the steps of
6-a to add PIN.
7. Adding PIN to Relay 2
a.
1.Enter programming mode
2.Press
4 (Yellow LED flash) to select slot position 00~09 (Green LED stay on
indicate the slot position is available)
3.Press 4-digit PIN (1 beep, Right Yellow LED flash)
4.Press # (1 Beep) back to programming mode (Yellow LED stay on)
5.Press # (1 Beep) back to standby mode (Blue LED stay on)
b.
1.Enter programming mode
2.Press
4 (Yellow LED flash) to select slot position 00~09 (Red LED stay on
indicate the slot position is unavailable)
3.Press
to delete the data from the slot position (1 beep, Green LED stay on)
4.Press # back to programming mode (Yellow LED on). Repeat the steps of 7-a to
add PIN.
8. Changing Master Code
1.Enter programming mode
2.Press
3 (Yellow LED flash)
3.Enter 4-digit master code twice e.g. 4567 4567 (1 beep, Yellow LED stay on)
4.Press # (1 beep) back to standby mode (Blue LED stay on)
9. Turning Anti-Tamper Alarm Function ON/OFF
1.Enter programming mode
2.Press
6 (Yellow LED flash)
3.Press 01 (1 beep, Yellow LED stay on) – function OFF
Press 02 (1 beep, Yellow LED stay on) – function ON
4.Press # (1 beep) back to standby mode (Blue LED stay on)
11. Resetting the Master Code to Default Value
Turn off the power. Press # continuously, and energize (1 beep), the master code
Copyright © All Rights Reserved. P-MU-DG-180 Ver. D Publish: 2011.03.18
Annex: User List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
User
User Name
Slot Number
PIN#
press 5 for the length of 5-digit master code; press 6 for the length of 6-digit
master code. (7 beeps, Yellow LED stay on).
※
After the length is changed, all PINs are cleared as well.
3. Press 4,5 or 6, e.g. press 4 for the length of 4-digit master code;
10. Changeing the length of the master code
1. Enter programming mode
2. Press (Yellow LED flash), press 04
4 Press # (1 beep) back to standby mode (Blue LED stay on)
is reset to default value.
(If the default value is 4 digits, master code is 1234; if 5 digits, 12345; if 6 digits,
123456.)
