© 2017 ICS®, Blount International Inc. REV072517 P/N 566594
890F4 OPERATOR MANUAL
6
E
N
G
LI
S
H
Safety Rules
PERSONAL SAFETY
Always wear protective clothing.
At a minimum always wear eye protection and/or face shield, hearing
protection, long sleeve shirt, long pants, closed toe shoes with non-slip soles,
and gloves. In many work situations, a hard hat and steel toed shoes may also
be required. Avoid loose fitting clothing.
This power cutter can generate hazardous dust and vapors.
Determine the nature of the material you are going to cut before proceed
-
ing with the job. Be especially aware of cutting materials containing silica and
asbestos as inhaling dust can result in respiratory disease. Be sure to use
appropriate respiratory protection designed to filter out microscopic particles.
Be sure to use recommended water pressure to minimize dust generation.
Over-exposure to vibration can lead to circulatory and/or nerve damage to
the extremities, especially in cold temperatures (Reynaud’s Disease).
If you experience tingling, numbness, pain or changes in skin color, particularly
in your fingers, hands or wrists, stop using the power cutter immediately. If the
problem persists, seek medical attention.
Following are the basic instructions for personal safety.
WARNING
Long-term exposure to noise can result in permanent hearing impairment.
Always wear approved hearing protection.
Fluids escaping under pressure can penetrate skin and cause severe
personal injury.
Do not use hands to search for leaks. Before disconnecting lines, be sure to
relieve all pressure. Do not apply pressure to damaged lines, hoses or fittings.
If any fluid is injected into the skin, seek medical attention immediately to
prevent gangrene. Consult supplied hydraulic fluid SDS for additional
information regarding proper handling and use instructions.
TRANSPORTING & STORING
WARNING
Hydraulic hoses are charged with fluid when the power cutter is shipped.
See the icsdiamondtools.com website for SDS information on
the hydraulic fluid.