ICS 880 Hydraulic Saw, Руководство оператора

Страница: 9 / 18

TITLE
880 OPERATOR’S MANUAL
9
F/N 525665 Oct 07 © 2007 ICS, Blount Inc.
STEP 6
Install bar clamp plate over the bar
studs.
GUIDE BAR AND DIAMOND CHAIN INSTALLATION
STEP 7
Install the side cover over the bar
studs and install side cover nuts.
Finger tighten only.
STEP 9
Lift up on the nose of hte bar and
firmly tighten the side cover nuts
(See note 2)
STEP 8
Tension the chain. The chain should
be tight, but able to be pulled around
the bar by hand (See Note 1).
Note 1: Do not “over tension” the diamond chain. Loss of power will result. It is normal for the
drivelinks to hang underneath the guide bar. The diamond chain should be snug but be able to be
pulled around the guide bar by hand.
Note 2: To prevent chain tensioner breakage, be sure the side cover nuts are tightened to
approximately 20 ft-lbs (27Nm).
SET-UP