ICS 880 Hydraulic Saw, Руководство оператора

Страница: 14 / 18

TITLE
880 OPERATOR’S MANUAL
1
© 2007 ICS, Blount Inc. F/N 525665 Oct 07
TROUBLESHOOTING
TROUBLESHOOTING
• SLOW DIAMOND CHAIN SPEED – Be sure the powerpack is providing the correct hydraulic
pressure and flow 12 gpm (5 l/min) fixed flow and 2,500 psi (172 bar)
• POOR CUTTING SPEED - Diamonds may be “glazed over”. Make a few cuts in an abrasive
material such as a cinder block to expose the diamonds.
• PREMATURE CHAIN STRETCH - Not enough water pressure. The minimum water pressure
rewquired is 20 psi (1. bar). Insufficient water supply will result in excessive wear on the chain,
which can lead to loss of strength and chain breakage.
• CHAIN TENSIONER BREAKAGE - Side cover nuts are not tight enough.
Torque to 20 ft-lbs (27Nm).
• WATER NOT FLOWING - Water hose is kinked or supply is not turned on.
• MOTOR WON'T TURN – Hydraulics are hookep up backwards or powerpack is set on reverse
flow.
Further questions?
Call 1-800-321-1240
or
visit our website at:
icsbestway.com