ICS Schneider Messtechnik testo 868s, Инструкция по эксплуатации

Страница: 39 / 42

7 Maintenance
37
In certain circumstances, the camera reports: Firmware update
finished. Please restart the device . A restart is not performed.
Action:
- After 10 seconds, switch off the camera; switch back on again after 3
seconds.

The current firmware version is displayed.
7.4.2
Performing an update with the camera
7.4.2.1
Preparing the camera

- The rechargeable battery is fully charged or the camera is connected
to the mains adapter.
1 - Switch on the camera.
2 - Open the cover of the interface.
3 - Connect the computer to the camera with the USB cable.

The camera is displayed as MTP Device - testo_8xx in Window
Explorer.
7.4.2.2
Performing an update
1
- Copy the
FW_T87x_Vx.xx.bin-
file to the camera directory using drag
& drop.
2 - Wait until the firmware has been copied.

Firmware update is performed.
3 - Observe the progress bar.

Thermal imager is automatically restarted. Update complete.