ICS Schneider Messtechnik HT10, Руководство пользователя

Страница: 38 / 124

HT10
EN - 13
5.6. CONTINUITY TEST
CAUTION
Before performing the continuity test, remove power from the circuit under
test and discharge all capacitors.
Fig. 9: Continuity test
1. Perform the preliminary Autotest function (see § 4.4)
2. Connect the
L1 and L2 probes to the object under test (see Fig.9)
3. Continuity test is active for resistance <4 00k

. The meter turns automatically on with
LED “
”
, the “Con” message is displayed and the buzzer sounds continuously
indicating a positive test
4. The meter automatically turns on when the two probes are separated from the
measured object
5. Press the /

key to activate/deactivate the white LED torch