ICS Schneider Messtechnik CPT-2 Series, Руководство пользователя

Страница: 31 / 80

31
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter CPT-2x
In this menu item, you can select the national language for further
parameterization.
With the " [->] " button, you can select the requested language, with
" OK
" you confirm the selection and move to the main menu.
You can change your selection afterwards with the menu item " Setup
- Display, Menu language ".
6.4 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "
Quick setup " in the start graphic on the display and
adjustment module.
Select the individual steps with the [->] key.
After the last step, " Quick setup terminated successfully " is displayed
briefly.
The return to the measured value indication is carried out through the
[->] or [ESC] keys or automatically after 3 s
Note:
You can find a description of the individual steps in the quick setup
guide of the sensor.
You can find "
Extended adjustment " in the next sub-chapter.
6.5 Parameter adjustment - Extended adjustment
For technically demanding measuring points, you can carry out
extended settings in "
Extended adjustment ".
The main menu is divided into five sections with the following func
-
tions:
Setup: Settings, e.g., for measurement loop name, application, units,
position correction, adjustment, signal output
Display: Settings, e.g., for language, measured value display, lighting
Selection language
Main menu