ICS Advent 486MBS Series, Руководство по эксплуатации продукта

Страница: 34 / 44

Manual Number: 41209-103-1 Page 2-8
486MBS Series Manual
DMA Channel 7
These options specify the bus that the named DMAs and interrupt request lines (IRQs) are used on.
These options allow you to specify IRQs and DMAs for use by legacy ISA adapter cards. The
settings are PnP or ISA/EISA. The default settings are PnP .
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
These options determine if AMIBIOS should remove an IRQ from the pool of available IRQs
passed to BIOS configurable devices. The available IRQ pool is determined by reading the ESCD
NVRAM (Flash BIOS ROM only). If more IRQs must be removed from the pool, the end user can
use these PCI/PnP Setup options to remove the IRQ by assigning the option to the ISA/EISA set-
ting. Onboard I/O is configurable by AMIBIOS. The IRQs used by onboard I/O are configured as
PCI/PnP. The settings are PCI/PnP or ISA/EISA .
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA adapter cards. The
settings are Disabled, 16k, 32k , or 64k. The Optimal and Fail-Safe default settings are Disabled.
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved memory area. The specified
ROM memory area is reserved for use by legacy ISA adapter cards.
The settings are C0000, C4000, C8000, CC000, D0000, D4000, D8000, or DC000 . The Optimal
and Fail-Safe default settings are C8000.
Peripheral Setup
Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS
Setup main menu. All Peripheral Setup options are described in this section.